1. Download Sbig Usb Devices Driver Download
2. Best Usb Devices

For this driver, please select SBIG Universal on the Setup tab.

This driver supports all SBIG USB and Ethernet cameras supported by the Generation 2 'SBIG Universal' drivers. This includes the modern ST-I, STF, STT, STXL and STX camera models and their filter wheels. It also supports older ST and STL camera models that have USB interfaces, and their associated filter wheels.

For Generation 2 'SBIG Universal' cameras using the AO-8, AO-8T, AO-L, or AO-X adaptive optics accessories, please use the SBIG w/ AO driver instead.

For Generation 3 cameras such as Aluma, with or without AO accessory, please select DL Imaging instead.

The latest version of the SBIG camera drivers are required. You can download them from http://www.sbig.com

Some SBIG cameras are capable of being operated in TDI mode.

For Ethernet connection, select Ethernet and enter the correct IP Address for the camera. The IP Address is ignored when connecting to a USB camera. To connect to a camera using USB, simply select the camera name from the Connect Todropdown.

Swap Chips, when activated, reverses the main sensor and autoguider sensor.

The Guide Chip setting is used to select between the internal guide chip and the separate Remote Guide Head that is available as an option for many SBIG cameras . Select the Internal setting to use the guide chip that is built in to the main camera body. Select External Remote to use a separate 'guide head'.

Ext. Trigger enables the external trigger mode. When on, the camera will not start exposing immediately when the Expose button is clicked. Instead, the camera will wait until an external trigger signal is received. Only certain models support this feature. Contact SBIG for information on connecting an external trigger.

Download Sbig Usb Devices Driver Download

Dec 19, 2019 IHV USB Audio 2.0 drivers and updates. For IHV provided third party driver USB Audio 2.0 drivers, those drivers will continue to be preferred for their devices over our in-box driver unless they update their driver to explicitly override this behavior and use the in-box driver. Audio Jack Registry Descriptions. The driver download area could be called by any of several different names including Downloads, Software Downloads, Driver Downloads, Drivers, Drivers and Firmware, Drivers and Software, etc. If you visit a website's home page first, look for a Support area. Any driver download options will probably be located within that area.

When using the integrated autoguider, which includes any 'external guide head' controlled through the camera, turn on the Dual Chip Mode check box on the Setup tab.

A set of Advanced settings are also available for the camera. These settings can be changed using the camera setup dialog, before connecting, or changed while connected using the Options button on the Settings tab of the CCD Control Window.

A variety of Readout Settings are available. Guider ABG affects the anti-blooming control for the autoguider CCD only (supported by older guiders with TC-211 or TC-237 sensors only). Anti-blooming for the main CCD is determined by the type of CCD chip installed in the camera.

Setting Binning Mode to Off-chip is useful when a non-anti-blooming CCD chip is installed. When enabled, it causes any binning to be performed after the CCD chip has been read (normally, binning is done inside the CCD chip before readout). Selecting this option results in slightly higher readout noise but greatly reduces blooming. This control has no effect for anti-blooming CCD chips, and has no effect for 1:1 binning. You can also set Binning Mode to Spectroscopy. In this mode, the main sensor can be binned Nx1 to Nx3, where N ranges from 1 to 255.

The DownloadPriority can be adjusted. Very High will ensure that no lines appear in the image due to readout delays, but may make it difficult to operate the mouse. Higher priority downloads may improve image quality on older cameras that do not have a built-in frame buffer.

Auto-Expose After Filter Change may be useful for clearing the array if rotating the filter wheel causes IR light strike on the sensor. This may be useful for the lower-cost and older filter wheel models (STT, STX, and STXL filter wheels do not use IR sensors).

If the DSS Control check box is checked, the DSS Control dialog will be displayed as soon as the user connects to the camera. If already connected, checking the DSS Control option causes the DSS Control dialog to appear, and unchecking it hides the dialog. This dialog is useful when the camera is used in conjunction with a Deep Space Spectrograph. See below for details on the DSS Control dialog.

RBI Preflash can be used to remove Residual Bulk Image by pre-flashing the array with infrared light and then flushing. Flash Length (s) controls the preflash duration in seconds, and Flush Count determines how many flush cycles to perform after the preflash. Default loads the default settings. These settings are only available when connected to a camera supporting these settings (firmware update may be required).

Readout Modes allows you to select Dual Channel Mode for cameras that have dual readout capability, and TDI Mode for camera models that can do Time Domain Integration (drift scanning). In TDI mode rows are read out of the camera continuously at a specified rate while the shutter remains open. For astronomical applications, TDI is used to capture a wide (E-W) swath of the sky using a fixed camera. When the camera is connected in TDI mode, the Camera Control window displays an additional TDI Tab.

The Color Conversion settings are enabled if you are not currently connected, or if you are connected to a one-shot color camera such as the ST-IC or STF-8300C. Debayer Mode selector allows you to choose the algorithm used for automatic color conversion. Fast mode produces reasonable color quality at a decent speed. High-Quality mode takes longer to convert the image, but produces images with fewer artifacts from the conversion process.

The Scaling % adjustments allow you to compensate for differing sensitivity between the color planes. You can adjust these while imaging a grey card or the Moon to remove the majority of any intrinsic color imbalance in the camera. Values of 100% result in no change. The scaling values can be typed in or adjusted using the spin controls.

The X Offset and Y Offset selections are used to correct for any misalignment of the color mask in the CCD camera. If Auto Color images exhibit a completely incorrect color rendition, try selecting different combinations of these two options.

Fan Control includes Enable Fan for models that have fan on/off control. In addition, Fan Speed adjustment is available for models that have adjustable fan speed. The Auto selection allows the camera to select the fan speed based on cooler power level. You can also set the fan speed manually. Reducing fan speed will reduce audible noise, and in rare cases vibration, but will reduce the effectiveness of sensor cooling.

The DSS Control dialog allows you to change the current mode of operation of a Deep Space Spectrograph. Clicking the Position Mode button moves the DSS slit out and configures the grating to show the image. Clicking the View Slit Mode button moves the DSS slit into position and configures the grating to show the image. Clicking the Grab Spectra Mode button moves the DSS slit into position and configures the grating to show the spectra.

Exposure Flags: Turning on Wait For Ext Trigger will cause the exposure to wait until the external trigger input is seen by the camera. The exposure is started normally in MaxIm DL, but will not actually start until the trigger input is detected. Refer to the camera manual for information on connecting an external trigger. Please note that some models do not support external triggering.

Customer Options: Turning on Use Window Heater will activate the window heater for models that support this feature. This is used as an anti-fog measure and should only be used if the camera is exposed to a high humidity environment causing the external surface of the chamber window to fog up. If any fogging is observed inside the chamber then the desiccant module needs to be recharged per the camera instruction manual. (Note: Permitting significant moisture accumulation inside the chamber can corrode the sensor or other circuitry and will void your warranty. Be sure to refresh the desiccant plug annually, especially if you are operating in a high humidity environment.)

Important Note: Some SBIG cameras contain interline CCD sensors that can be electronically shuttered, allowing them to achieve shorter exposures than frame-transfer chips, where the exposure duration is limited by the speed of the shutter. Unfortunately, the camera electronics behave differently for short exposures than for longer exposures, producing different bias patterns in the camera images. To successfully calibrate images from these cameras, bias frames cannot be used to calibrate images whose duration is shorter than .12s. These short duration images must be dark subtracted using a dark frame of the same duration as the light frame. Similarly, dark frames exposed for less than .12s cannot be scaled to match light exposures of a longer duration. For longer exposures, all of the calibration options work normally.

Note: The plug-in nominally supports TDI rates from 1 msec to 5 sec per row. However the fastestusablerate is determined by the speed of your computer, and the slowest by the dark current of your camera. With a USB camera on a 1GHz or faster computer, TDI will normally operate well using focal lengths from 400mm to 4000mm.

Availability of this feature depends on Product Level.

Best Usb Devices

• August 22, 2019 2.9.8

  Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.
  Version 2.9.8	Released August 22, 2019	Type ZIP	Filesize 3MB
  Requirements Intel Core i3 or similar, 2 GB RAM USB 3.0 controller Graphics card with 24 or 32 bit Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit) DirectX 9.0c or higher
  Changelog Added several internal interfaces for particular sensors (J003).

• January 25, 2019 2.9.6

  Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.
  Version 2.9.6	Released January 25, 2019	Type ZIP	Filesize 3MB
  Requirements Intel Core i3 or similar, 2 GB RAM USB 3.0 controller Graphics card with 24 or 32 bit Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit) DirectX 9.0c or higher
  Changelog Added missing Tonemapping Auto property.

• May 4, 2018 2.9.5

  Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.
  Version 2.9.5	Released May 4, 2018	Type ZIP	Filesize 3MB
  Requirements Intel Core i3 or similar, 2 GB RAM USB 3.0 controller Graphics card with 24 or 32 bit Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit) DirectX 9.0c or higher
  Changelog Enabled tonemapping for 8bit video formats, e.g. Y800, RGB24 and RGB32.

• November 21, 2017 2.9.4

  Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.
  Version 2.9.4	Released November 21, 2017	Type ZIP	Filesize 3.2MB
  Requirements Intel Core i3 or similar, 2 GB RAM USB 3.0 or USB 2.0 controller (depends upon camera model) Graphics card with 24 or 32 bit Windows XP, Windows Vista, Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit) DirectX 9.0c or higher
  Changelog Repaired not working J003 mono sensor pattern fix on particular video formats. This driver version is the last that works in Windows XP.

• January 9, 2017 2.9.3

  Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.
  Version 2.9.3	Released January 9, 2017	Type ZIP	Filesize 3.2MB
  Requirements Intel Core i3 or similar, 2 GB RAM USB 3.0 or USB 2.0 controller (depends upon camera model) Graphics card with 24 or 32 bit Windows XP, Windows Vista, Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit) DirectX 9.0c or higher
  Changelog Added a pattern fix for J003 mono sensors.

• January 9, 2017 2.9.1

  Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.
  Version 2.9.1	Released January 9, 2017	Type ZIP	Filesize 3.2MB
  Requirements Intel Core i3 or similar, 2 GB RAM USB 3.0 or USB 2.0 controller (depends upon camera model) Graphics card with 24 or 32 bit Windows XP, Windows Vista, Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit) DirectX 9.0c or higher
  Changelog Fixed the driver signature Code 52 error on new Windows 10 v1607 systems.

• January 15, 2016 2.8.9

  Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.
  Version 2.8.9	Released January 15, 2016	Type ZIP	Filesize 2.3MB
  Requirements Intel Core i3 or similar, 2 GB RAM USB 3.0 or USB 2.0 controller (depends upon camera model) Graphics card with 24 or 32 bit Windows XP, Windows Vista, Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit) DirectX 9.0c or higher
  Changelog Changed certificates so that the driver can also be installed in Vista.

• November 9, 2015 2.8.7

  Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.
  Version 2.8.7	Released November 9, 2015	Type ZIP	Filesize 2.3MB
  Requirements Intel Core i3 or similar, 2 GB RAM USB 3.0 or USB 2.0 controller (depends upon camera model) Graphics card with 24 or 32 bit Windows XP, Windows Vista, Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit) DirectX 9.0c or higher
  Changelog Fixed an error which can appear when using sharpness on older CPUs.

• October 20, 2015 2.8.5

  Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.
  Version 2.8.5	Released October 20, 2015	Type ZIP	Filesize 2.3MB
  Requirements Intel Core i3 or similar, 2 GB RAM USB 3.0 or USB 2.0 controller (depends upon camera model) Graphics card with 24 or 32 bit Windows XP, Windows Vista, Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit) DirectX 9.0c or higher
  Changelog Fixed a bug which can appear on LivePause call.

• July 15, 2015 2.8.0

  Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.
  Version 2.8.0	Released July 15, 2015	Type ZIP	Filesize 2.4MB
  Requirements Intel Core i3 or similar, 2 GB RAM USB 3.0 or USB 2.0 controller (depends upon camera model) Graphics card with 24 or 32 bit Windows XP, Windows Vista, Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit) DirectX 9.0c or higher
  Changelog Support of DFK ECU010-L34 with serial number property. Added tone mapping.

• February 17, 2015 2.7.33

  Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.
  Version 2.7.33	Released February 17, 2015	Type ZIP	Filesize 2.4MB
  Requirements Intel Core i3 or similar, 2 GB RAM USB 3.0 or USB 2.0 controller (depends upon camera model) Graphics card with 24 or 32 bit Windows XP, Windows Vista, Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit) DirectX 9.0c or higher
  Changelog The Auto Focus Onepush Running flag now resets correctly after the auto focus has finished.

• February 5, 2015 2.7.32

  Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.
  Version 2.7.32	Released February 5, 2015	Type ZIP	Filesize 2.4MB
  Requirements Intel Core i3 or similar, 2 GB RAM USB 3.0 or USB 2.0 controller (depends upon camera model) Graphics card with 24 or 32 bit Windows XP, Windows Vista, Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit) DirectX 9.0c or higher
  Changelog Video format MJPG (2592x1944) of DFK AFU050-L34 camera can now be used.

• January 14, 2015 2.7.31

  Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.
  Version 2.7.31	Released January 14, 2015	Type ZIP	Filesize 2.3MB
  Requirements Intel Core i3 or similar, 2 GB RAM USB 3.0 or USB 2.0 controller (depends upon camera model) Graphics card with 24 or 32 bit Windows XP, Windows Vista, Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit) DirectX 9.0c or higher
  Changelog Support for IMX236 based cameras. Support for RGB64 color formats. Several performance improvements.

• June 6, 2014 2.7.9.1152

  Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.
  Version 2.7.9.1152	Released June 6, 2014	Type ZIP	Filesize 2.1MB
  Requirements Intel Core i3 or similar, 2 GB RAM USB 3.0 or USB 2.0 controller (depends upon camera model) Graphics card with 24 or 32 bit Windows XP, Windows Vista, Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit) DirectX 9.0c or higher
  Changelog Added new properties: Brightness, sharpness, de-noise, saturation, hue and contrast. Added new property: Highlight reduction. Added new property: White balance temperature controls. Pixelfix for Y16 cameras now works as expected. VideoControl_ExternalTrigger (DirectShow property) can now be set as expected.

• January 1, 2014 2.6.5.1014

  Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.
  Version 2.6.5.1014	Released January 1, 2014	Type ZIP	Filesize 1.9MB
  Requirements Intel Pentium IV or similar, 2 GB RAM USB 3.0 or USB 2.0 controller (depends upon camera model) Graphics card with 24 or 32 bit Windows XP, Windows Vista, Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit) DirectX 9.0c or higher
  Changelog Fixed missing auto-gain for DFK AFU130. Fixed focus when start value is out of auto_focus_range. Fixed problem with AUTOFOCUS_ROI_RIGHT: minimum possibly wrong. Fixed auto focus ROI not working for 21*UC cameras. Fixed crash on load/connect with certain cameras 22/72xUC. Fixed previous exposure settings not being loaded on reconnect. Complete reworking of internal property system. Fixed Windows XP driver load crash. Fixed drop counter to be accessible from DirectShow. Fixed Windows 8 problem with certain video formats needing converters with standard DirectShow filters (e.g. Y800, capturing to an Y800 avi file was not possible). Fixed a problem with Windows 8 usbxhci driver not allowing transfers larger then 4 MB.

• February 26, 2013 2.4.14.851

  Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.
  Version 2.4.14.851	Released February 26, 2013	Type ZIP	Filesize 1.9MB
  Requirements Intel Pentium IV or similar, 2 GB RAM USB 3.0 or USB 2.0 controller (depends upon camera model) Graphics card with 24 or 32 bit Windows XP, Windows Vista, Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit) DirectX 9.0c or higher
  Changelog WHQL certification.